No Products in the Cart
The Believer Ready to Fly drone is one of the best VTOLs in the market. The Believer Ready to Fly drone is an easy-to-use drone, offering the simplicity of vertical take-off and landing, without the need for a long landing strip, while offering the endurance benefits of a fixed-wing once airborne.
The drone has a sophisticated design, that is durable, efficient, and easy to repair in the event of damage. Due to its detachable parts throughout its build, the drone is quick and easy to disassemble for transport and for maintenance purposes.
Read all standard features and upgradable customizations of the Believer Ready to Fly Drone v2.2 on this page.
UAV Systems International supports domestic supply chains in our products.
The Believer Ready To Fly Drone features extensive use of U.S manufactured components throughout the drone.
Our flight controllers and onboard electronics are all manufactured in California, giving you the performance, reliability you are looking for in your drone.
The Believer Ready To Fly drone is both NDAA 848 and TAA compliant.
With the Cube Orange flight controller, the operator can program waypoints and flight plans into the drone before takeoff.
The high-quality flight controller features manual flying modes, stabilize mode and a (fail-safe function) return to home mode in addition to the autonomous mode.
The drone can be piloted with the included controller when flying manually or via a laptop or tablet utilizing the Mission Planner software when flying autonomously.
The Believer Ready to Fly drone v2.2 uses a high-quality US/Swiss-made Ublox NEO-M8N. It is equipped with dual compasses, allowing for incredibly accurate positioning.
A highly accurate, USA-made sonar module, gives extra precision and stability when flying under 23 ft. (ca. 7 m.).
If you have any other GPS requirements for your drone then please talk to one of our drone specialists.
The Believer Long-Range Drone uses the Australian RFD900X telemetry module, giving you the potential to fly up to 20 km (12 mi).
The RFD900X also features AES-256 encryption, ensuring the link between your ground station and the Skywalker Long Range drone is secure at all times.
As of now, the Believer Ready to Fly Drone standard comes with ADS-B obstacle avoidance programmed in the Flight Controller.
The ADS-B is programmed to detect and avoid obstacles, or to detect and report (warning) them to the drone operator.
The ADS-B is built-in into the circuit board of the Believer Drone.
The ESCs used on the Believer Ready to Fly drone v2.2 are lighter than their predecessors, delivering a much more agile feel, along with a quicker response, and feature a higher power to weight ratio.These ESCs are perfect to get maximum efficiency out of your drone.
The Believer Ready to Fly drone v2.2 is powered by 1 powerful brushless motor which is rear-mounted and features a folding propeller. The folding propeller ensures that your hand does not get injured by the propeller when the hand launches the drone into the air.The high-quality powerful brushless motor requires low maintenance compared to other types of motors and offers superior power and efficiency for the size of the motor.
The Believer Ready to Fly drone v2.2 uses the L9R Long Range Radio module, giving you the potential to fly up to 3.22 km (2 mi). The range is upgradable by an add-on further down mentioned on this page.
In case you require any other module, please talk to one of our agents.
The Believer Long Range Drone utilizes 3 CREE LED lights, giving you visibility up to 3 mi (4.8 km) away.
These powerful LED lights ensure easy visibility of your Believer Drone from the ground, and also make it clearly visible to other aircraft in the vicinity.
The newly designed battery packs currently weigh 32% less than the same sized LiPo battery that we used before, giving you the same great power while saving weight which directly translates into additional flight time or payload.Extra battery packs are also one of the most common add-ons that customers buy with us. No one wants to miss out on some extra flight time!
Did you know that airlines only have maximum liability coverage for flights by the Montreal Convention of approximately ±$1,600 USD (1,131 SDR)? This is the most that airlines must pay a passenger or company for a lost, damaged, or delayed package or bag.
With this AirTag you will know the exact location of your drone at all times when transporting it with our embedded AirTag. Possible package loss due to transport will herewith be nearly minimized to 0% risk. You can get geolocation at all times, of the exact location of your package.
After your package has arrived at the destination, you are able to connect the AirTag to your own iOS device and keep using the AirTag for any purpose.
We are an official partner of Ardupilot. Ardupilot is the most advanced, full-featured, and reliable open-source software for Pixhawk powered drones.The fully open-source software is constantly evolving and being improved upon by a diverse team of developers around the world.
The Believer Ready to Fly drone uses the Orange Cube flight controller, which is a fully open-source flight control system running Ardupilot.The Cube Orange flight controller is supported by developers all over the world and can be modified to take your Believer Ready to Fly drone to the next level.
|Flight Time||120 Mins|
|Payload Capabiliy (In Addition To UAV + Battery)||700g (1.5 lb)|
|Max Take-Off Weight||5500g (12.12 lb)|
|Recommended Flight Speed||72 km/h|
|Battery (each battery)||14,000 mAh|
Our standard transmitter included with the Skywalker is the upgraded Radiomaster TX16S.
This transmitter features the following:
The most popular upgrade for the Believer Ready to Fly drone v2.2 is the Herelink Ground Station. This ground station takes your drone to a next level flight experience.
Purchasing the Herelink Transmission system features the following:
Contact us 24 hours a day, 7 days a week through chat, email, phone, or Skype.
UAV offers discounts on qualifying EDU or GOV purchases.
Talk to us and we'll make sure we got your project sorted.
We ship to most countries worldwide and assist with import procedures.
The Believer Ready to Fly drone standard comes with a 6-month warranty. During this time, any parts that prematurely fail as a result of manufacturing defects will be replaced free of charge.
A commitment to quality is part of our company DNA. We run an engineering first approach, pushing our products to the limit in internal testing, and constantly taking feedback from real-world use to ensure we are implementing every improvement we can.
Our support does not end when you make a purchase. We offer personal delivery and training for a small additional fee, making sure you fully understand and know how to use our products. We also offer 24/7 call, chat, email, and Skype support for all of our products.
We have been in business since the drone industry was in its infancy. As a result, we have extensive experience in the business and have worked with clients in over 100 countries around the world.